H3C ICG2000的网速限制方法，你知道吗?下面本站小编为大家分享的就是H3C ICG2000的网速限制方法，希望对大家有所帮助!
通过基于网段的CAR规则可以限制整个网段内每台主机的速率或者是整个网段的速率，也可以对某一IP地址范围内的每台主机的速率或者整个网段的'速率进行限制。
5.10.1 对整个网段的速率进行限制
[H3C]qos carl 1 source-ip-address subnet 192.168.1.1 24
[H3C]interface GigabitEthernet 1/0
[H3C-GigabitEthernet1/0]qos car inbound carl 1 cir 10000000 cbs 10000000 ebs 0 green pass red discard
5.10.2 对整个网段的每个IP的速率进行限制
[H3C]qos carl 1 source-ip-address subnet 192.168.1.1 24 per-address
[H3C]interface GigabitEthernet 1/0
[H3C-GigabitEthernet1/0]qos car inbound carl 1 cir 10000000 cbs 10000000 ebs 0 green pass red discard
5.10.3 对某一IP地址范围内的速率进行限制
[H3C]qos carl 1 source-ip-address range 192.168.1.10 to 192.168.1.20
[H3C]interface GigabitEthernet 1/0
[H3C-GigabitEthernet1/0]qos car inbound carl 1 cir 10000000 cbs 10000000 ebs 0 green pass red discard
5.10.4 对某一IP地址范围内每个IP的速率进行限制
[H3C]qos carl 1 source-ip-address range 192.168.1.10 to 192.168.1.20 per-address
[H3C]interface GigabitEthernet 1/0
[H3C-GigabitEthernet1/0]qos car inbound carl 1 cir 10000000 cbs 10000000 ebs 0 green pass red discard
漏了单一IP限速。
还有就是限速会带来负面影响，举个例子游戏延时过高，必须解决内外网带宽不均衡的问题，将内网限速值和外网流量整形值设置成一样!
举一个例子：网吧带宽只有8M，内网PC机有200多台，很可能就是因为有人在下载或者用QQ live等软件导致内网流量过大，远远超过8M。
所以一般情况下面都需要做速率的限制，对每台PC机都做。我们处理得很多掉线问题，就是因为没有做限制速度而导致的。通过dis int e1/0看一下内网流量，如果有Overruns，则多半说明内网流量太大，路由器处理不过来了。
[Quidway]dis int e1/0
Ethernet1/0 current state :UP
Line protocol current state :UP
Description : Ethernet1/0 Interface
The Maximum Transmit Unit is 1500, Hold timer is 10(sec)
Internet Address is 192.168.1.1/24
IP Sending Frames Format is PKTFMT_ETHNT_2, Hardware address is 000f-e239-0260
Media type is twisted pair, loopback not set, promiscuous mode not set
100Mb/s, Full-duplex, link type is autonegotiation
Output flow-control is disabled, input flow-control is disabled
Output queue : (Urgent queuing : Size/Length/Discards) 0/50/0
Output queue : (Protocol queuing : Size/Length/Discards) 0/500/0
Output queue : (FIFO queuing : Size/Length/Discards) 0/75/0
Last clearing of counters: Never
Last 300 seconds input rate 220900.42 bytes/sec, 1767203 bits/sec, 572.95 pa
ckets/sec
Last 300 seconds output rate 464099.40 bytes/sec, 3712795 bits/sec, 655.10 p
ackets/sec
Input: 4414550 packets, 3834890077 bytes, 4414550 buffers
58297 broadcasts, 2 multicasts, 0 pauses
127451 errors, 0 runts, 0 giants
0 crc, 0 align errors, 127451 overruns
0 dribbles, 0 drops, 0 no buffers
Output:1206335 packets, 871172966 bytes, 1206335 buffers
955 broadcasts, 0 multicasts, 0 pauses
0 errors, 0 underruns, 0 collisions
0 deferred, 0 lost carriers
AR18-2X在升级到F1707之后，可以实现基于每个IP地址的限速。1863-1最新版本也支持该功能，命令一样。
网吧中限制内网PC的速率，上传速度200K，下载速率300K。
定义192.168.0.2 to 192.168.0.200内每台主机上传的流量
[Quidway] qos carl 1 source-ip-address range 192.168.0.2 to 192.168.0.200 per-address
定义192.168.0.2 to 192.168.0.200内每台主机下载的流量
[Quidway] qos carl 2 destination-ip-address range 192.168.0.2 to 192.168.0.200 per-address
[Quidway] interface ethernet 1/0
-------限制上行速率
[Qudiway-Ethernet1/0] qos car inbound carl 1 cir 200000 cbs 200000 ebs 200000 green pass red discard
------限制下行速率
[Qudiway-Ethernet1/0] qos car outbound carl 2 cir 300000 cbs 300000 ebs 300000 green pass red discard